top of page

Formula Student Bizkaia is constituted by a group of students from the Faculty of Engineering of Bilbao, belonging to the University of the Basque Country (UPV/EHU).

292909817_10159936176544719_4483381740477150544_n.jpg
Faculties

Faculty Advisors

logo blanco.png

Javier Corral

logo blanco.png

Mikel Díez

logo blanco.png

Asier Zubizarreta

The Faculty Advisor is expected to accompany the team to the competition and will be considered by competition officials to be the official university representative. They also may advise their team on general engineering and engineering project management theory.

logo blanco.png

Team Leader 

The team leader is the person who provides direction, instructions and guidance to the team, for the purpose of achieving a certain goal. He also works with the technical managers and the team sponsors to obtain the required resources to support  team's activities.

Miguel Vázquez
Team Leader

Team leader
Reponsabes técnicos

Team Managers

The team needs a number of different managers with various skill sets. Technical managers lead technological development activities. They tend to possess a high degree of expertise in a given technical area, so that they must be able to lead a team developing that code. Moreover, the financial and organization managers will be in charge of the group working smoothly, making sure everything works properly.

Asier_Bilbao2.jpg
logo blanco.png

Asier Bilbao
Technical Manager

Daniel_Pangua2.JPG
logo blanco.png

Daniel Pangua
Mechanics Technical Manager

thumbnail (1).jpg
logo blanco.png

Xabier Echaniz
Electronics Technical Manager

DSC02179291120514.jpg
logo blanco.png

Asier Vergara
Composites Technical Manager

logo blanco.png

Ricardo Maté
Electrical Technical Manager

logo blanco.png

Kerman Gorroño
Quality Manager

logo blanco.png

Kevin Cadavid
Financial Manager

Paula_SanPelayo_edited.jpg
logo blanco.png

Paula San Pelayo
Organization Manager

Aerodynamics group

Aerodynamics group is responsible for the design, calculus and manufacture of all aerodynamic parts of the vehicle. They develop the  front and rear wing, including different pieces as the diffuser, undertray the difuser and the sidepods. In adition, they are responsible for the cooling system of the powertrain. One of the main objectives of the group is to improve the performance of the car  achieving an optimun lift/drag ratio. They are continously innovating with the designs, manufacturing techniques and new materials implementation.

Alex Alzola
Aerodynamics Manager

Alex Alzola.jpg
logo blanco.png
logo blanco.png

Iker Castellano

DSC_0074_0876.jpg
logo blanco.png

Xabier Abasolo

DSC_0066_0874.jpg
logo blanco.png

Izaro Martínez

DSC_0079_0877.jpg
logo blanco.png

Ander Altuna

Ibai_Vera.jpg
logo blanco.png

Ibai Vera

Aero
Chassis
Ainhoa_Franco.jpg
logo blanco.png

Ainhoa Franco
Chassis Manager

Chassis group

Chassis  group is responsible for the design, calculus and manufacture of structural parts of the vehicle. They develop the elements as the monocoque. Moreover they also develop different pieces as the seat, anti-roll arches, headrest or nose. One of the main objectives of every year is reducing weight keeping the pilot safe and conformtable  and innovating with the designs and materials used.

Lander_Angulo.jpg
logo blanco.png

Lander Angulo

DSC_0061_0873.jpg
logo blanco.png

Andrea Arana

DSC02190291120519.jpg
logo blanco.png

Asier Aurre

thumbnail (2).jpg
logo blanco.png

Mikel Ugarte

DSC_0039_0871.jpg
logo blanco.png

Iker Unanue

thumbnail (4).jpg
logo blanco.png

Jon Gómez

Dinamics
logo blanco.png

Dynamics group

Dynamics group is in charge of vehicle dynamics and the design, manufacture and maintain mechanical assemblies that make up the unsprung mass of the vehicle: corners and suspension. It also handles the steering assembly and braking system that includes parts of corners and the floorboard.

Fernando Bidea
Dynamics Manager

Alex_Cabello.JPG
logo blanco.png

Alex Cabello

Martin_Zaballa3_edited.jpg
logo blanco.png

Martín Zaballa

logo blanco.png

Javier Trueba

Alesander_Balsategui_Perez.jpg
logo blanco.png

Alesander Balsategui

Gorka_Vazquez_Pulido.jpg
logo blanco.png
DSC_0048.jpg
logo blanco.png

Gorka Vázquez

Aitor Ruiz

DSC_0044_0872.jpg
logo blanco.png

Aimar Sagastizabal

Electronics
240ffd50-b939-4e59-b0ad-0709e16cb46a.jpg
logo blanco.png

David Ortega
Electronics Manager

Electronics group

Electronics group is in charge of low voltage systems of the vehicle. They are responsible for the design and creation of PCBs, the software implemented in them and telemetry. Its function is to gather information from the sensors distributed throughout the car and manage them in the electrical control unit (ECU), with the aim of sending signals to the different parts of the car, from the floorboard through the dashboard to the rear module where the motors and inverters are located.

logo blanco.png

Egoitz Andrés

Serna tec.jpg
logo blanco.png

Jon Serna

logo blanco.png

Abraham Elcorobarrutia

Maialen_Acedo_Martinez.jpg
logo blanco.png

Maialen Acedo

Eduardo_Alejandro_Gómez.jpg
logo blanco.png

Eduardo Gómez

Andrea_Rodriguez_Paz.jpg
logo blanco.png

Andrea Rodríguez

e9100cf8-60a2-4f05-ae3b-665f4181cc7e.jpg
logo blanco.png

Ibon Urruchua

Organi
Paula_SanPelayo_edited.jpg
logo blanco.png

Paula San Pelayo
Organization Manager

Organization group

Organization group despite not being related to the design and technical production of the vehicle has an important role in the team. It is responsible for managing communication and the proper operation of the team in terms of workload distribution and organization of time.

Unai_Lopez_Montecelo.jpg
logo blanco.png

Unai López

Pablo_Andrés_Valero(2).jpg
logo blanco.png

Pablo Andrés

IMG_20220327_204649.jpg
logo blanco.png

Oihane Corpión

Power
Juan Nolasco.jpg
logo blanco.png

Juan Nolasco
Powertrain Manager

Powertrain group

Powertrain group is responsible for the high voltage traction system: from the accumulator (batteries system) to the motors including inverters. Its aim is to develop a strong, reliable and powerful tractive system and for this reason is in charge of the design, validation, construction and development of the assembly.

​

Furthermore, its aim is also to transmit the power generated in the motors to the wheels of the car. This group is in charge of mainshafts, epicyclics, bearings and all supports and anchoring systems of these components to the monocoque

thumbnail (3).jpg
logo blanco.png

Markel Rekagorri

Nerea_Ruiz_DelOlmo.jpg
logo blanco.png

Nerea Ruiz

Lorea_Ruiz_Sauto.jpg
logo blanco.png

Lorea Ruiz

DSC_0083_0878(2).jpg
logo blanco.png

Ander Olano

Andrés_Ricardo.jpg
logo blanco.png

Andrés Llerena

Simulación
Patxo.jpg
logo blanco.png

Iker Pacho
Simulation Manager

Simulation & Control group

Simulation is responsible of maximizing the potential of the car. and of modeling, analyzing and technological development of the vehicle. Many of the designs are based on the mathematical and theoretical studies of this group, and at the same time serve as a starting point to create the complex control algorithms that govern the car and improve its dynamics and behavior.

Maialen_Loinaz_Anton.jpg
logo blanco.png

Maialen Loinaz

DSC_0036_0870.jpg
logo blanco.png

Joel del Río

Xabier_Amil_González.jpg
logo blanco.png

Xabier Amil

logo blanco.png

Driverless group

The Driverless group is in charge of the research, design and development of the first autonomous vehicle of the team. Perception, Sensor Fusion and Vehicle Control are some of the many tasks they must tackle.

Mario Rodríguez

Driverless Manager

DSC_0069_0875.jpg
logo blanco.png

Irene Álvarez

Gorka_Ortiz_delaCalva.jpg
logo blanco.png

Gorka Ortiz

Asier Celorrio.jpg
logo blanco.png

Asier Celorrio

DSC_0092_0880.jpg
logo blanco.png

Miguel García

MORE INFO IN OURSEASON 21/22 BOOKLET

bottom of page